Parts and tools

Part

Oil matching the engine and drivetrain row

Viscosity and volume are in the spec table. The chart does not list a filter part number.

GM TechLink 2019-2020 oil capacity chart (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

For adding the oil listed on the row that matches the engine and the drivetrain.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

DEX-COOL mixed 50/50 with clean drinkable water

Capacities are approximate. Recheck the level after filling.

2018 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Park on level ground. For an accurate reading, check the oil after the engine has been off for at least two hours.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug that matches the gap in the engine table

No part number and no firing order are printed, so neither is added.

2018 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that transmission

The recommended-fluids table names the fluid. It does not print a fill quantity.

2018 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The capacity table prints the torque. It does not print a tightening sequence.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Oil of the viscosity on the matching RPO row

SAE 5W-30 for the L3B and LV3, SAE 0W-20 for the L82, L84, and L87, in the with-filter volumes above. The chart does not print a filter part number.

GM TechLink 2019-2020 oil capacity chart (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

For adding oil at the fill cap. The owner's manual tells you to use the cap shown in the engine-compartment overview.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The DEXRON fluid named for that transmission

There is no transmission dipstick. The manual says the level check is a special procedure and should be done at the dealer.

Transmission fluid section in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

ACDelco engine air cleaner

A3244C with the high-capacity cleaner, or A3246C without it.

Air filter part numbers in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The air cleaner listed for the housing on the truck

The parts table does not say which trucks have the high-capacity cleaner. The gasoline cover in the procedure is held by three screws.

Air cleaner procedure in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

DEX-COOL mixed 50/50 with clean drinkable water

The capacity note says the values cover the entire cooling system and its components. Fill to the approximate level, then recheck.

Coolant rows in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

ACDelco oil filter listed for that engine

PF66 is the 2.7L L4 filter. PF63E is the 4.3L, 5.3L, and 6.2L filter. The manual says the parts can be obtained from a dealer.

Oil filter numbers in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Park on level ground. For an accurate reading, check the oil after the engine has been off for at least two hours. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

ACDelco spark plug for the gasoline engine

41-106-IP is the 2.7L plug. 41-114 is the 4.3L, 5.3L L82, 5.3L L84, and 6.2L plug.

Spark plug part numbers in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug listed for that VIN code

The engine table says the gaps are preset. Re-gapping is not recommended and can damage the plug. No firing order is printed.

Spark plug table in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The capacity table prints one wheel-nut torque. It does not print a tightening sequence.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Front wiper blade, either side

Both rows print 55 cm (21.7 in) and GM 84578275.

Wiper part number in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

GM 84578275 wiper blade

The maintenance text says trained dealer technicians can check the blades and replace them. It does not print a release procedure.

Wiper blade sizes in the 2020 Silverado owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft BXT-40R

Listed for both engines in the 2008 Escape Motorcraft part-number table.

Escape Motorcraft part numbers (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft BXT-40R or equivalent

The table lists that number in both engine columns. It does not print a group size.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FA-1683 air filter element

The 2008 Escape parts table lists FA-1683 for the 2.3L I4 and for the 3.0L V6. The guide says to use that element.

Air filter number in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Screwdriver or clamp tool for the inlet tube

The guide says to loosen the clamp and disconnect the air inlet tube on the V6 only. It does not name a driver size.

Tekton screwdrivers (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft Premium Gold Engine Coolant VC-7-B, WSS-M97B51-A1

Yellow-colored, with bittering agent. Equivalent coolant must meet the same specification.

Escape coolant capacity table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft Premium Gold Engine Coolant

Add a 50/50 mix with distilled water to a cold reservoir, to the FULL COLD level or the COLD FILL RANGE.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FL-910 oil filter, 2.3L

Listed for the 2.3L I4 in the 2008 Escape Motorcraft parts table. Confirm the engine before you buy.

Filter number in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FL-820-S oil filter, 3.0L

Listed for the 3.0L DOHC V6 Duratec in the same table. It is not the 2.3L filter.

Filter number in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The owner's guide says to remove the filler cap and pour the recommended oil through a funnel.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Clean rag

Used to wipe the dipstick before the second reading.

McMaster-Carr shop towels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Front brake pads for a 2008 Ford Escape

No pad part number was printed in the sources read. Confirm the engine and the brake option on the retailer page. Amazon search links are searches, not a part number.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Front rotors, if the service procedure replaces them

No rotor specification was read. Do not buy a rotor from a thickness this page does not have.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Needed for the lug nuts after the wheel goes back on. The figure and the tightening order are on the wheel lug nut guide. The order is a figure and is not redrawn.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Jack and jack stands

The lug-nut guide says to loosen the nuts a half turn before the wheel is off the ground, and not to finish tightening until the wheel is lowered. Do not work under a car held only by a jack.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Front sway bar link set, driver and passenger

TRQ PSA55625, a two-piece set. The 1A Auto product page lists it for the 2005–2012 Ford Escape, which includes 2008, and the video's links include new nuts. Confirm fitment on that page for your engine and drivetrain before you buy. Price changes; it is not repeated here.

TRQ PSA55625 at 1A Auto (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

2005–2008 Escape sway bar links and bushings

Category page if you want to compare kits. This sheet does not pick among the other SKUs listed there.

1A Auto category for 2005–2008 Escape (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

15 mm wrench and 15 mm socket

The link nuts are 15 mm. A wrench starts them; a 15 mm socket on a torque wrench finishes the upper nut.

Tekton combination wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

17 mm wrench

Holds the stud so the nut can turn. Used on the lower nut, and also shown as a hold on the back of the upper stud.

Tekton combination wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

5 mm and 4 mm Allen keys

The original upper stud takes a 5 mm Allen. The new stud in this video takes a 4 mm Allen. Bring both.

Tekton metric hex keys (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Needs to read foot-pounds and accept the 15 mm socket. The lower nut is awkward to reach with one.

Tekton torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Rust penetrant

Spray the nuts and let it soak before you break them loose.

Liquid Wrench (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Jack and jack stands

The wheel has to come off. Support the vehicle on stands, not on the jack alone. Use the lift points in the owner's manual.

McMaster-Carr jack stands (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

H13 headlamp bulb

The owner's guide chart lists two H13 bulbs for the headlamps and says they must be D.O.T. marked for North America. Confirm the lamp in front of you matches a bulb you can turn out by hand. The guide sends the front side marker to a dealer.

Bulb chart in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

No driver is named for the headlamp bulb

The headlamp steps are reach, turn, and pull. The chart says replacement bulbs must carry a D.O.T. mark for North America.

Bulb chart in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Oil pan gasket for the 3.0L

The 3.0L procedure says to install a new oil pan gasket and to discard the old one. It does not print a part number. Do not use this gasket on the 2.3L unless the 2.3L procedure says it fits.

3.0L oil pan installation (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Silicone gasket and sealant for the 3.0L dots

The in-vehicle step says a 10 mm (0.40 in) dot of silicone sealant at the areas indicated. The engine-out step says a 10 mm (0.39 in) dot of silicone gasket and sealant on the front cover-to-cylinder block joint. No brand number was printed in the text that was read.

3.0L silicone dot wording (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FL-820-S oil filter, 3.0L

Named for the 3.0L DOHC V6 in the owner's guide. The 3.0L pan procedure tightens a new filter to 5 Nm (44 lb-in) plus 180 degrees.

Filter number in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FL-910 oil filter, 2.3L

Named for the 2.3L I4 in the owner's guide. A 2.3L filter torque was not in the sources read.

Filter number in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

SAE 5W-20 engine oil

Both engines in the owner's guide use SAE 5W-20 meeting WSS-M2C930-A with the API certification mark. With-filter capacity is 4.5 quarts on the 2.3L and 6.0 quarts on the 3.0L.

Oil recommendation in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Hoist

The 3.0L removal starts with the vehicle in NEUTRAL on a hoist and points to the jacking and lifting section. A floor jack by itself is not that step.

3.0L oil pan removal, hoist step (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Used for the 3.0L figures in the torque table. It does not create a 2.3L figure that was not read.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Plastic scraper

The 3.0L installation says to use a plastic scraping tool to remove all traces of the gasket, then clean the sealing surfaces with metal surface prep.

3.0L oil pan installation, cleaning step (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The owner's guide says to pour the recommended oil through a funnel. Capacities are on the oil and filter guide.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Drive belt for the 2008 Escape engine you have

No Motorcraft belt number was printed in the engine-data table. The 2.3L and the 3.0L figures are different. Confirm the engine before you buy.

Drivebelt figure titles in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The owner's guide figure for that engine

Open the drivebelt routing figure for the 2.3L or the 3.0L. This page does not replace that drawing.

Drivebelt figures in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Belt tool, only if the Ford procedure names one

No tensioner tool, socket size, or spring direction was printed in the text that was read. Do not guess the direction the tensioner moves.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Spark plug meeting Ford specification for that engine

No part number is printed. The footnote says Motorcraft or an equivalent that meets Ford material and design specifications, and it sends the replacement to a dealer.

Spark plug footnote in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed for removal

The owner's guide does not name a socket, a gap tool, or a torque for this job. It sends replacement to a dealer.

Engine data in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft MERCON V XT-5-QM

Automatic transmission row.

Escape transmission capacities (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft SAE 75W-90 gear oil, WSS-M2C203-A1

Manual transmission row. Part number printed on that line is XY-75W90-QGL.

Escape manual transmission capacity (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that transmission

MERCON V for the automatic. SAE 75W-90 meeting WSS-M2C203-A1 for the manual.

2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Retighten to the specified torque at 500 miles after any wheel disturbance.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Front and rear wiper blades

Buy the blade that matches the arm you removed. The cited section does not print a length or a Motorcraft blade number.

Wiper procedure in the 2008 Escape owner's guide (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Soft cloth

The guide says poor wiping can be improved by cleaning the blades and the windshield before you decide the blade is worn out.

McMaster-Carr shop towels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer for a transmission fluid change

The fluid-check section says the transmission has no dipstick and that a dealer checks and changes the fluid.

2020 Escape owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft battery from the engine's parts table

BHEF-48H6 on the 1.5L and 2.0L EcoBoost tables. BXT-99RT4-A on the 2.5L hybrid and plug-in hybrid table.

Escape Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer or the Motorcraft parts source named in the manual

The parts introduction says Motorcraft parts are available at an authorized dealer.

2020 Escape owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft cabin air filter FP-89

The same number is printed in every engine's Motorcraft parts table in this manual.

Escape Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer for replacement

The climate-control section says to see a dealer to replace the filter. No glove-box removal steps are printed.

2020 Escape cabin air filter (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft engine air filter for that engine

FA-1939 excluding the hybrid. FA-1948 on the 2.5L hybrid and plug-in hybrid.

Escape Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Screwdriver for the intake-boot clamp

Both procedures start by loosening the clamp on the air filter housing cover with a screwdriver.

2020 Escape air-filter procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft Yellow prediluted coolant, WSS-M97B57-A2

If prediluted coolant is not available, dilute the approved concentrate 50/50 with distilled water. The capacities table prints the prediluted part numbers.

2020 Escape owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft FL-910-S or a filter that meets SAE/USCAR-36

The parts table names the filter. It does not print a filter torque or a drain-plug torque.

2020 Escape owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

DOT-marked halogen bulb of the trade number in the chart

Use a North American headlamp bulb marked with an authorized D.O.T. mark. LED positions are not owner-serviceable.

2020 Escape bulb chart (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Flat-tip screwdriver for the rear lamp covers

The direction-indicator and reverse-lamp steps call for a screwdriver. The headlamp steps do not name a tool beyond the service cap.

2020 Escape bulb procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft spark plug for that engine

SP-550 on the 1.5L EcoBoost, SP-578 on the 2.0L EcoBoost, and SP-530 on the 2.5L hybrid and plug-in hybrid.

Escape Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer for spark plug replacement

Each parts table says to contact an authorized dealer for spark plug replacement and to replace plugs at the scheduled interval.

2020 Escape engine specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The specification is 100 lb-ft. The tightening order is a figure and is not redrawn here.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft wiper blades from the parts table

The same three numbers appear on the 1.5L, 2.0L, and 2.5L hybrid tables. Length is not printed.

Escape Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Replacement blade that locks onto the arm

The procedure describes the lock. It does not print a blade length.

2020 Escape wiper procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named in that row

Transmission quarts are approximate dry fill. Transfer case fluid is MERCON LV, not ULV.

2021 Explorer owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft BAGM-48H6-760, confirmed with a dealer

The same number is printed on the 2.3L, 3.0L, and 3.3L parts tables, with the dealer footnote.

Explorer Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer

The battery footnote sends the correct replacement to a dealer. Parts are also listed as available at fordparts.com.

2021 Explorer owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft cabin air filter FP-89

The same number is printed on each engine's Motorcraft parts table in this manual.

Explorer Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

No tool is named for the glove-compartment tabs

The steps say to press the tab on each side. They do not name a screwdriver.

2021 Explorer cabin air filter (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft engine air filter for that parts table

FA-1884 on the 2.3L and 3.0L tables. FA-1947 on the 3.3L table.

Explorer Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Screwdriver for the intake clamp

Each written procedure loosens a clamp with a screwdriver. The 3.0L procedure loosens two clamps.

2021 Explorer air-filter procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft Yellow prediluted coolant, WSS-M97B57-A2

The check section says to use prediluted coolant approved to the correct specification. Do not mix colors or types.

2021 Explorer owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The Motorcraft filter named for that engine

No drain-plug torque is printed. Do not fill above the maximum mark on the dipstick.

2021 Explorer owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

DOT-marked bulb of the trade number in the chart

Headlamp bulbs must carry an authorized D.O.T. mark for North America. The headlamps in this chart are LED and are not serviceable.

2021 Explorer bulb chart (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

A screwdriver or another suitable tool for the covers

The rear-lamp and license-plate steps name a screwdriver as an example. They do not name a socket size.

2021 Explorer bulb procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft spark plug from the parts table for that heading

SP-578 on the 2.3L and 3.0L tables. SP-520 on the 3.3L table. No ST part number is printed.

Explorer Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer for spark plug replacement

Each parts footnote says to contact an authorized dealer for spark plug replacement.

2021 Explorer engine specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The specification is 150 lb.ft. The tightening order is a figure and is not redrawn here.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft wiper blades from the parts table

The same three numbers appear on the 2.3L, 3.0L, and 3.3L tables. Length is not printed.

Explorer Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Replacement blade that locks onto the arm

The procedure describes the lock. It does not print a blade length.

2021 Explorer wiper procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft MERCON ULV, WSS-M2C949-A

Named in the 3.3L, 3.5L EcoBoost, and 3.0L diesel sections. Part number printed there is XT-12-QULV.

F-150 MERCON ULV specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft MERCON LV, WSS-M2C938-A

Named on the transfer-case rows. U.S. and Mexico XT-10-QLVC. Canada CXT-10-LV12.

F-150 transfer-case fluid specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that section

The 3.3L, 3.5L, and diesel sections say to use only MERCON ULV in a transmission that requires it. The 2.7L and 5.0L fluid name is left off this page.

2018 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft battery listed for the truck

BAGM-48H6-760, BAGM-94RH7-800 on King Ranch, Lariat and Premium gasoline trucks, or BAGM-49H8-850 on the 3.0L diesel.

Battery numbers in the 2018 F-150 manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed for replacement

The battery appears as a letter on the under-hood figures. The parts table does not print a disconnect procedure.

2018 F-150 Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FA-1883 engine air filter

Listed for every engine in the 2018 third-printing parts tables.

Air filter number in the 2018 F-150 manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FP-79 cabin air filter

Listed beside the engine air filter on each parts table.

Cabin filter number in the 2018 F-150 manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The parts introduction says to use Motorcraft parts from a dealer or fordparts.com. It does not name a housing tool.

2018 F-150 Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft Orange Prediluted Antifreeze/Coolant

WSS-M97B44-D2. VC-3DIL-B in the U.S. and Mexico. CVC-3DIL-B in Canada.

Coolant specification in the 2018 F-150 manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft Orange Prediluted Antifreeze/Coolant

Each engine section names this coolant and WSS-M97B44-D2. The U.S. part printed is VC-3DIL-B. The Canada part printed is CVC-3DIL-B.

2018 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft oil filter for the engine in the truck

FL-2062 on the 2.7L EcoBoost, FL-500-S on the 3.3L, 3.5L EcoBoost, and 5.0L, and FL-2081 on the 3.0L diesel. The manual points to fordparts.com or a dealer for Motorcraft parts.

2018 F-150 owner's manual, Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The gasoline top-up steps say you may need a funnel at the filler cap.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Clean lint-free cloth

The oil-check steps say to wipe the dipstick with a clean, lint-free cloth.

McMaster-Carr shop towels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft spark plug for the gasoline engine

SP-542, SP-520, SP-534, or SP-551 as listed above. The manual says to use Motorcraft parts that meet Ford's specification.

Spark plug numbers in the 2018 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed for removal

The parts notes tell you to contact a dealer and to follow the maintenance schedule. They do not name a socket or a gap tool.

Spark plug notes in the 2018 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Retighten to the specified torque within 100 miles after any wheel disturbance.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft windshield wiper blade

WW-2242 for the gasoline engines in this printing, WW-2247 for the 3.0L diesel.

Wiper numbers in the 2018 F-150 manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The parts tables name the blade and do not print a release procedure.

2018 F-150 Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft MERCON ULV, WSS-M2C949-A, MERCON ULV

Named in the ULV engine sections. U.S. and Canada part number printed there: XT-12-QULV.

F-150 MERCON ULV specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft MERCON LV, WSS-M2C938-A

Named in the 3.3L section. Part numbers printed there: XT-10-QLVC in the U.S. and CXT-10-LV6 in Canada.

F-150 MERCON LV specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that engine section

ULV sections say to use only MERCON ULV. The 3.3L section says to use only MERCON LV.

2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft battery number from the engine's parts table

BAGM-49H8 on the 3.0L diesel. Both BAGM-48H6-760 and BAGM-94RH7-800 are printed for the gasoline engines listed above, without a choice rule.

F-150 Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft replacement battery from the parts table

The manual points to an authorized dealer or fordparts.com for Motorcraft parts.

2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FP-79 cabin air filter

The part number is in the 2020 F-150 Motorcraft tables. The manual does not print the steps to reach it.

FP-79 in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The manual tells you to see a dealer to replace the filter. It does not list a tool or a glove-box screw.

Cabin filter note in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Drive belt for the engine in the truck

The cited specification pages identify the routing figure and do not print a Motorcraft belt number in the text read for this sheet. Match the belt to the figure before you buy.

2020 F-150 owner's manual PDF (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The owner's manual figure for that engine

The routing is a picture in the specification section. The text does not describe the pulley order, so no hand tool is listed here.

Drive belt figures in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FA-1883 air filter element

Listed for the gasoline engines above and also printed on the 3.0L diesel parts table. The removal steps still differ by fuel type.

FA-1883 in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

No driver size is named

The gasoline procedure says to release the clamps and lift the cover. It does not name a socket or a screwdriver.

Air filter steps in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft Yellow Prediluted Antifreeze/Coolant, WSS-M97B57-A2

The U.S. and Canada part numbers VC-13DL-G and CVC-13DL-G are printed in the 2.7L materials block. The other engine blocks name the same coolant and specification.

F-150 coolant capacities (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft Yellow Prediluted Antifreeze/Coolant

Each engine section names this coolant and WSS-M97B57-A2. The 2.7L materials block also prints VC-13DL-G for the U.S. and CVC-13DL-G for Canada.

2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft oil filter for the engine in the truck

FL-2062 on the 2.7L EcoBoost, FL-500-S on the 3.3L, 3.5L EcoBoost, and 5.0L, and FL-2081 on the 3.0L diesel. The manual points to fordparts.com or a dealer for Motorcraft parts.

2020 F-150 owner's manual, Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The gasoline top-up steps say you may need a funnel at the filler cap.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Clean lint-free cloth

The gasoline oil-check steps say to wipe the dipstick with a clean, lint-free cloth.

McMaster-Carr shop towels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

H11 low beam or 9005 high beam

Use a bulb with a D.O.T. mark, as the chart requires for North America. Do not buy these for a truck whose headlamps are the LED row.

Bulb chart in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Driver for the wheel-liner screws

Access is through the wheel liner. The manual says to remove two screws and one push pin. It does not name the screw head.

Tekton screwdrivers (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft spark plug for the gasoline engine

SP-578, SP-520, or SP-551 as listed above. The manual says to use Motorcraft parts that meet Ford's specification.

Spark plug numbers in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed for removal

The parts notes tell you to contact a dealer or to follow the maintenance schedule. They do not name a socket or a gap tool.

Spark plug notes in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Retighten to the specified torque within 100 miles after any wheel disturbance.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft WW-2248 wiper blade

Listed as the windshield wiper blade in the 2020 F-150 Motorcraft parts tables. The manual does not print a length next to that number.

WW-2248 in the 2020 F-150 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Soft sponge or cloth

The check section says to clean the blades with washer fluid or water on a soft sponge or cloth, and to feel the edge for roughness.

McMaster-Carr shop towels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer for a transmission fluid check

The fluid-check note says a dealer checks the fluid and, if required, adds it.

2019 Ranger owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft battery number from the parts table

Both BAGM-48H6-610 and BAGM-94RH7-800 are printed on the battery line, without a choice rule.

Ranger Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

A dealer or fordparts.com

The parts introduction says Motorcraft parts are available at a dealer or at fordparts.com.

2019 Ranger owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft cabin air filter FP-88

The climate-control page locates the filter and sends the replacement to a dealer.

Ranger Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Authorized dealer for replacement

No glove-box removal steps are printed.

2019 Ranger cabin air filter (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft FA-1943

The only engine air filter number in this manual's parts table.

Ranger Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

No tool is named for the housing clips

The procedure says to remove the clips. It does not name a screwdriver.

2019 Ranger air-filter procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft Orange prediluted coolant, WSS-M97B44-D2

The top-up note allows a 50/50 mixture of antifreeze and water, or prediluted coolant that meets the specification.

2019 Ranger owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Motorcraft FL-910-S or an SAE/USCAR-36 filter

The parts table names the filter. It does not print a drain-plug torque or a filter torque.

2019 Ranger owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft SP-578

The only spark-plug number in this manual's parts table.

Ranger Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Dealer for spark plug replacement

The Motorcraft parts note says to contact a dealer for spark plug replacement and to replace plugs at the scheduled interval.

2019 Ranger engine specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The specification is 100 lb.ft. The tightening order is a figure and is not redrawn here.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Motorcraft wiper blades from the parts table

The note says the blades are different lengths. The table does not print those lengths in inches.

Ranger Motorcraft parts (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The blade that matches that arm

Wrong length can let the blades clash and damage the wiper system. Use the part number for that side.

2019 Ranger wiper procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Oil matching the Sierra 1500 RPO row

SAE 5W-30 or SAE 0W-20 as listed above. The chart does not print a filter part number.

GM TechLink 2019-2020 oil capacity chart (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

For adding oil after you have matched the RPO on the chart.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long Life Antifreeze/Coolant Type 2

Use the premixed coolant. The manual does not give a driveway drain procedure on the pages used here.

Accord engine coolant section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Specified coolant

Add it only to a cool reserve tank, up to the MAX mark.

2019 Accord owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Genuine Honda Motor Oil 0W-20 or API premium-grade 0W-20

Both engine tables use that grade. Synthetic oil is allowed when it carries the API certification seal and the specified viscosity.

Accord recommended engine oil (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Drain pan and oil-filter wrench

The procedure drains the sump and says a dealer sells the special filter wrench.

2019 Accord owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Recommended oil is poured in at the fill cap.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Tires of the original size

The checking-tires section says to use the size and type recommended in the owner's manual.

Accord tire specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire pressure gauge

Check at least monthly and before long trips, including the spare.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

HCF-2, ATF-Type 2.0, or Honda MTF

Match the fluid to the transmission named in that engine's table.

Accord transmission specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

No drain tool is specified

The manual tells the owner not to check or change automatic transmission fluid. This page records the specified fluid.

2019 Accord owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Torque the nuts after the vehicle is lowered.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Wiper blade rubber for this holder

The manual does not print a length or a part number. Match the rubber to the holder on the car.

Accord wiper blade procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Replacement blade rubber

The procedure replaces the rubber in the holder. It does not print a blade length.

2019 Accord owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long-Life Antifreeze/Coolant Type 2

50/50 with distilled water in the specifications tables. The maintenance chapter calls the same coolant Type 2 and says it is premixed.

Civic sedan coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Specified coolant

Add Honda Type 2 only after the engine and radiator are cool. The level is read in the reserve tank.

2019 Civic sedan owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Genuine Honda Motor Oil 0W-20 or API premium-grade 0W-20

Both engine tables list those two descriptions. The manual does not print an aftermarket filter part number.

Civic sedan specifications, engine oil (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Drain pan and oil-filter wrench

The procedure drains the oil and says a special filter wrench is sold by a dealer.

2019 Civic sedan owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Oil is poured in at the fill cap after the drain bolt is torqued.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Original-size tires listed in the specification table

Replace with radials of the same size, load range, speed rating, and maximum cold pressure rating.

Civic sedan tire specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire pressure gauge

Measure monthly and before long trips, including the spare. Tires lose about 1 to 2 psi per month even in good condition.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda HCF-2 or Honda MTF

HCF-2 is the CVT fluid. MTF is the manual transmission fluid. The two CVT change capacities are not interchangeable.

Civic sedan transmission specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

No drain tool is specified

The maintenance chapter tells the owner not to change CVT fluid. This page records the specified fluid and the change capacity only.

2019 Civic sedan owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire steps say to tighten the wheel nuts to the printed torque after the vehicle is lowered.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long-Life Antifreeze/Coolant Type 2

Premixed 50/50. The notice says the genuine mixture withstands freezing to about -31 F (-35 C).

Civic sedan coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda Long-Life Antifreeze/Coolant Type 2

The manual says this coolant is already premixed. Do not add straight antifreeze or water.

2021 Civic sedan coolant section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Genuine Motor Oil 0W-20 or API premium-grade 0W-20

Both the 1.5 L and 2.0 L specification pages list that grade. No filter part number is printed.

Civic sedan engine oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Special oil-filter wrench

The procedure says you need a special wrench to replace the filter and that a dealer can supply it.

2021 Civic sedan owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Bulb named in the table for that engine page

H11, HB3, and H8 only where the sedan table still lists them. LED rows stay LED.

Civic sedan light bulb specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications tables name wattage and do not print a removal procedure.

2021 Civic sedan light bulb tables (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Spark plug listed for that engine

ILZKAR8H8S on the 1.5 L. DILKAR7H11GS, DILKAR7G11GS, or DXE22HQR-D11S as listed together on the 2.0 L.

Civic sedan spark plug specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names the plugs and does not print a socket, a gap, or a torque.

2021 Civic sedan specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire steps print 80 lbf-ft after the wheel is lowered. They also say not to add torque with a foot or a pipe.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures above are the cold pressures in the specifications tables.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda HCF-2

Specified CVT fluid for both engines in this sedan book. Capacities stay on the engine that prints them.

Civic sedan CVT fluid specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda dealer

The transmission section says to have a dealer check the level and replace the fluid if necessary, and not to check or change it yourself.

2021 Civic sedan transmission fluid section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long Life Antifreeze/Coolant Type 2

50/50 premix. Freeze protection of the genuine coolant is described as about -31 F (-35 C).

CR-V engine coolant section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Specified coolant

Add it to a cool reserve tank, up to the MAX mark.

2019 CR-V owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Genuine Honda Motor Oil 0W-20 or API premium-grade 0W-20

Both engines use that grade. The manual recommends a genuine Honda oil filter and does not print an aftermarket number.

CR-V engine oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Dealer service, if you follow the warning

The oil-change page says specialized equipment is required and tells the owner not to change the oil and filter.

2019 CR-V owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Original tire size for the wheel on the vehicle

The tire chapter says improper sizes can affect handling and stability.

CR-V tire specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire pressure gauge

Measure at least monthly or before long trips, including the spare.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda HCF-2

CVT only. 2WD and AWD use different change capacities.

CR-V CVT specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda DPSF-II

Rear differential on models that have one. Not the CVT fluid.

CR-V rear differential specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Dealer service for the CVT

The maintenance chapter says not to check or change the CVT fluid yourself.

2019 CR-V owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Torque the nuts after the vehicle is lowered.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long Life Antifreeze/Coolant Type 2

Premixed 50/50. The notice says the genuine mixture withstands freezing to about -31 F (-35 C).

CR-V coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda Long Life Antifreeze/Coolant Type 2

The manual says this coolant is already premixed. Do not add straight antifreeze or water.

2020 CR-V coolant section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Genuine Motor Oil 0W-20 or API premium-grade 0W-20

The specifications table lists both. The manual recommends a genuine Honda oil filter and does not print an aftermarket number.

CR-V engine oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Dealer service, if you follow the warning

The oil-change page says specialized equipment is required and tells the owner not to change the oil and filter.

2020 CR-V owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Bulb named in the light table for that position

H11 55 W or HB3 60 W only where the table still lists those halogen bulbs. LED positions stay LED.

CR-V light bulb specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names wattage and does not print a removal procedure.

2020 CR-V light bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

NGK ILZKAR8J8SY

The only spark plug number in the 2020 gas CR-V specifications.

CR-V spark plug specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names the plug and does not print a socket, a gap, or a torque.

2020 CR-V specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire steps print 80 lbf-ft after the wheel is lowered. They also say not to add torque with a foot or a pipe.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures above are the cold pressures in the specifications table.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda HCF-2

Specified CVT fluid. The notice says not to mix it with other transmission fluids.

CR-V CVT fluid specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda DPSF-II

Specified rear differential fluid where that row applies. Capacity 1.32 US qt (1.247 L).

CR-V rear differential fluid (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda dealer

The transmission section says to have a dealer check the level and replace the fluid if necessary, and not to check or change it yourself.

2020 CR-V transmission fluid section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long Life Antifreeze/Coolant Type 2

Premixed 50/50. The notice says the genuine mixture withstands freezing to about -31 F (-35 C).

CR-V coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda Long Life Antifreeze/Coolant Type 2

The manual says this coolant is already premixed. Do not add straight antifreeze or water.

2021 CR-V coolant section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Genuine Motor Oil 0W-20 or API premium-grade 0W-20

The specifications table lists both. The manual recommends a genuine Honda oil filter and does not print an aftermarket number.

CR-V engine oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Dealer service, if you follow the warning

The oil-change page says specialized equipment is required and tells the owner not to change the oil and filter.

2021 CR-V owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Bulb named in the light table for that position

H11 55 W or HB3 60 W only where the table still lists those halogen bulbs. LED positions stay LED.

CR-V light bulb specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names wattage and does not print a removal procedure.

2021 CR-V light bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

NGK ILZKAR8J8SY

The only spark plug number in the 2021 gas CR-V specifications.

CR-V spark plug specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names the plug and does not print a socket, a gap, or a torque.

2021 CR-V specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire steps print 80 lbf-ft after the wheel is lowered. They also say not to add torque with a foot or a pipe.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures above are the cold pressures in the specifications table.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda HCF-2

Specified CVT fluid. The notice says not to mix it with other transmission fluids.

CR-V CVT fluid specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda DPSF-II

Specified rear differential fluid where that row applies. Capacity 1.32 US qt (1.247 L).

CR-V rear differential fluid (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda dealer

The transmission section says to have a dealer check the level and replace the fluid if necessary, and not to check or change it yourself.

2021 CR-V transmission fluid section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Long Life Antifreeze/Coolant Type 2

Premixed 50/50. The notice says the genuine mixture withstands freezing to about -31 F (-35 C).

CR-V coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda Long Life Antifreeze/Coolant Type 2

The manual says this coolant is already premixed. Do not add straight antifreeze or water.

2022 CR-V coolant section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda Genuine Motor Oil 0W-20 or API premium-grade 0W-20

The specifications table lists both. The manual recommends a genuine Honda oil filter and does not print an aftermarket number.

CR-V engine oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Dealer service, if you follow the warning

The oil-change page says specialized equipment is required and tells the owner not to change the oil and filter.

2022 CR-V owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Bulb named in the light table for that position

H11 55 W or HB3 60 W only where the table still lists those halogen bulbs. LED positions stay LED.

CR-V light bulb specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names wattage and does not print a removal procedure.

2022 CR-V light bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

NGK ILZKAR8J8SY

The only spark plug number in the 2022 gas CR-V specifications.

CR-V spark plug specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The specifications table names the plug and does not print a socket, a gap, or a torque.

2022 CR-V specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire steps print 80 lbf-ft after the wheel is lowered. They also say not to add torque with a foot or a pipe.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures above are the cold pressures in the specifications table.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda HCF-2

Specified CVT fluid. The notice says not to mix it with other transmission fluids.

CR-V CVT fluid specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Honda DPSF-II

Specified rear differential fluid where that row applies. Capacity 1.32 US qt (1.247 L).

CR-V rear differential fluid (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda dealer

The transmission section says to have a dealer check the level and replace the fluid if necessary, and not to check or change it yourself.

2022 CR-V transmission fluid section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda Long-Life Antifreeze/Coolant Type 2

If Honda coolant is unavailable, a high-quality non-silicate coolant for aluminum engines may be used temporarily, then the system must be flushed and refilled with Honda coolant.

2019 Odyssey owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Oil-filter wrench

The procedure says a special wrench is needed to replace the filter and that a dealer can supply it.

2019 Odyssey owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The bulb named for that grade

Footnote 1 is LX and LX-HS. Footnote 2 is EX, EX-L, EXL-NR, EX-R, EXLNAV, and EXLRES. Footnote 3 is Elite and Touring.

2019 Odyssey light-bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb named for that position

The specifications table names the bulbs. It does not print a removal sequence, so none is added.

2019 Odyssey owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

NGK DILZKR7B11G

The engine-specifications table lists this plug. It does not print a gap or a torque.

2019 Odyssey engine specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug named in the engine table

No firing order is printed, so no sequence is drawn.

2019 Odyssey owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are the cold figures in the specification table. The flat-tire section also calls 60 psi the specified spare pressure.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The ATF named for that grade

The specification names the fluid. It does not print a fill quantity or a drain procedure.

2019 Odyssey owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Honda dealer

The specifications name the fluids and the change quantities. They do not print a drain-plug torque.

2020 Pilot specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

2020 Pilot owner's manual

The capacity footnotes on the coolant block are the shift lever and the electronic gear selector, not the wheel-size footnotes used in the tire table.

2020 Pilot specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Oil-filter wrench

The procedure says a special wrench is required and that a dealer sells it. Follow the instructions supplied with the new filter.

2020 Pilot owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The drain bolt has a printed torque. The filter does not.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

Measure when the tires are cold: parked at least three hours, or driven less than 1 mile.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire section prints the wheel-nut torque after the car is lowered.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Oil meeting the row for that engine

SAE 5W-30 for the 1.6 T-GDI, SAE 5W-20 for the 2.0 MPI, in the volumes above. A filter part number is not in the lubricant table used here.

2019 Elantra lubricant table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The manual says to clean around a filler plug or dipstick before you add oil, especially in dust.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The phosphate-based ethylene glycol coolant named in the table

The table does not print a 50/50 mix ratio.

2020 Elantra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The table is a drain-and-refill volume. Clean the area around the drain plug and dipstick before opening them. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The bulb type in the wattage table

Type A and type B are the labels in the bulb table. The manual does not crosswalk them to trim names.

2020 Elantra bulb wattage (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb named for that position

The wattage table names the bulbs. It does not print a removal sequence, so none is added.

2020 Elantra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The engine specifications table

No plug part number and no gap are printed, so neither is added.

2020 Elantra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are the inflation figures in the tires-and-wheels table. There is no trim crosswalk.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that transmission

Clean the area around the filler plug before opening it. The table does not print a drain-plug torque.

2020 Elantra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Phosphate-based ethylene glycol coolant mixed as the table shows

A low reservoir is topped up with distilled, deionized, or soft water. The change itself is assigned to a Hyundai dealer.

Coolant section in the 2022 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The check procedure is in the maintenance chapter. The change itself is assigned to a Hyundai dealer. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb printed for that row

Type A and Type B are both printed. The table does not say which trims use which type.

Bulb wattage table in the 2022 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The engine table prints the firing order. It does not print a plug number, a gap, or a removal procedure.

Engine table in the 2022 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The table prints a normal-load pressure. It does not print separate front and rear numbers for that cell.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

ATF SP-IV approved by Hyundai

The table prints a volume. It does not print a drain procedure or a check-plug torque.

Lubricant table in the 2022 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The table prints a range. It does not print a single target inside that range or a tightening sequence.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Phosphate-based ethylene glycol coolant mixed as the table shows

The change itself is assigned to a Hyundai dealer. The top-up in this book is water mixed with antifreeze.

Coolant section in the 2023 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The check procedure is in the maintenance chapter. The change is assigned to a Hyundai dealer. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb printed for that row

Type A and Type B are both printed. The table does not say which trims use which type.

Bulb wattage table in the 2023 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The engine table prints the firing order. It does not print a plug number, a gap, or a removal procedure.

Engine table in the 2023 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The table prints a normal-load pressure. It does not print separate front and rear numbers for that cell.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

ATF SP-IV approved by Hyundai

The table prints a volume. It does not print a drain procedure or a check-plug torque.

Lubricant table in the 2023 Tucson owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The table prints a range. It does not print a single target inside that range or a tightening sequence.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Mopar 10 Year/150,000 Mile OAT coolant or the equivalent in the table

A non-OAT fill has to be drained, flushed, and refilled with OAT meeting MS.90032 by an authorized dealer.

2019 Cherokee owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity table is a with-filter quantity. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Mopar ZF 8&9 Speed ATF or the equivalent named in the table

The chassis table names the fluid. It does not print a fill quantity or a drain procedure.

2019 Cherokee owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Use a calibrated torque wrench and a six-sided deep-wall socket. The socket must be fully engaged.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Mopar 10 Year/150,000 Mile OAT coolant or the equivalent in the table

A non-OAT fill has to be drained, flushed, and refilled with OAT meeting MS.90032 by an authorized dealer.

2019 Grand Cherokee owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity table is a with-filter quantity. It is not a drain procedure, and no drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that unit

The chassis table names the fluids. It does not print a fill quantity or a drain procedure.

2019 Grand Cherokee owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Use a calibrated torque wrench and a six-sided deep-wall socket. The socket must be fully engaged.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Mopar 10 Year/150,000 Mile OAT coolant or the equivalent in the table

A non-OAT fill has to be drained, flushed, and refilled with OAT meeting MS.90032 by an authorized dealer.

2018 Wrangler JL owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity table is a with-filter quantity. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that unit

The chassis table names the fluids. It does not print a fill quantity or a drain procedure.

2018 Wrangler JL owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Use a calibrated torque wrench and a six-sided deep-wall socket. The socket must be fully engaged.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

API certified SAE 5W-20 for the 3.6L

Six quarts with the filter, from the 2019 handbook. The diesel row is separate and is not this part.

2019 Wrangler fluid capacities (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

For adding oil at the filler. The cited page does not describe the drain plug.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Mopar 10 Year/150,000 Mile OAT coolant or the equivalent in the table

A non-OAT fill has to be drained, flushed, and refilled with OAT meeting MS.90032 by an authorized dealer.

2020 Wrangler owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity table is a with-filter quantity. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that unit

The chassis table names the fluids. It does not print a fill quantity or a drain procedure.

2020 Wrangler owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Use a calibrated torque wrench and a six-sided deep-wall socket. The socket must be fully engaged.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

2019 Altima owner's manual

The air-cleaner steps are written. No part number is printed next to them.

2019 Altima air cleaner section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

2019 Altima owner's manual

The cooling section describes a cold-level check at the reservoir and the radiator.

2019 Altima cooling system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Oil-filter wrench

The procedure loosens the filter with a wrench, then removes it by hand.

2019 Altima owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The procedure prints a drain-plug torque and an oil-filter torque.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Nissan dealer

The spark-plug section says if replacement is required, visit a Nissan dealer. Do not clean or regap iridium plugs.

2019 Altima owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Nissan dealer

The do-it-yourself section says if checking or replacement of CVT fluid is required, visit a NISSAN dealer.

2019 Altima CVT fluid section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire section says to tighten the nuts to the specified torque with a torque wrench as soon as possible.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

2019 Altima owner's manual

The replacement steps are written. No blade length is printed.

2019 Altima wiper section (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Viscous paper air cleaner filter

Replaced on the maintenance schedule. The manual does not print a part number.

Rogue air cleaner procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Replacement air cleaner filter

The viscous paper element is replaced, not cleaned and reused. No part number is printed.

2019 Rogue owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent

Not the green Nissan long-life coolant. The capacity includes the reservoir.

Rogue coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Genuine NISSAN Long Life Antifreeze/Coolant (blue)

The cooling section says to use this coolant or equivalent, and not to mix other types.

2019 Rogue owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Genuine Nissan Motor Oil 0W-20 SN or equivalent

If that oil is not available, the table allows a synthetic 0W-20 GF-5 SN. The manual does not print an oil-filter part number.

Rogue recommended fluids (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Floor jack and jack stands

The setup steps say to raise and support the vehicle at the jack-up points, with an adapter on the jack-stand saddle.

2019 Rogue owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Oil filter wrench

The filter is loosened counterclockwise, then tightened by the printed turn and torque.

Rogue oil change procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Oil is refilled through the filler opening.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Spark plug FXE20HE-11C

Nominal gap 0.043 in (1.1 mm). Do not adjust.

Rogue engine specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Nissan dealer

The manual says if replacement is required, visit a Nissan dealer. Do not clean or regap iridium plugs.

2019 Rogue owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The tires specified by Nissan

The TPMS section says tires other than those originally specified by Nissan could affect TPMS operation.

Rogue tire pressure warning (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire pressure gauge

The low-tire warning section says to use a gauge and set all four tires to the label pressure.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Genuine NISSAN CVT Fluid NS-3 or equivalent

The only CVT fluid named in the capacity table. Quantity is not stated.

Rogue CVT fluid specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Nissan dealer for a fluid change

The do-it-yourself chapter says to visit a dealer when CVT fluid must be checked or replaced.

2019 Rogue owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The manual says to tighten the wheel nuts to the specified torque with a torque wrench.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Front wiper blades specified for this Rogue

No length or part number is printed in the replacement steps.

Rogue wiper blade procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Genuine NISSAN wiper blades or equivalent

The ProPILOT section says to use blades designed for this model and model year. No length is printed.

2019 Rogue owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

2019 Sentra owner's manual

The cooling section describes the blue factory fill. The MR16DDT quart split is not clear enough to publish.

2019 Sentra cooling system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The procedure prints a single drain-plug torque and a single filter torque.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Nissan dealer

The maintenance schedule says to install plugs of the type originally equipped. The specifications name the plugs. No socket size is printed.

2019 Sentra engine specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Nissan dealer

The CVT capacity is not printed. This page does not add a drain procedure.

2019 Sentra capacities (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire section says to tighten the nuts to specification with a torque wrench as soon as possible.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Mopar 10 Year/150,000 Mile OAT coolant meeting MS.90032

A non-OAT fill has to be drained, flushed, and refilled with OAT meeting MS.90032 by an authorized dealer.

2019 Ram 1500 DS owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity table is a with-filter quantity. No drain-plug torque is printed.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that unit

The chassis table names the fluids. It does not print a transmission or axle fill quantity.

2019 Ram 1500 DS owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Use a calibrated torque wrench and a six-sided deep-wall socket. The socket must be fully engaged.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

API certified oil in the grade for that engine

SAE 0W-20 for the 3.6L, SAE 5W-20 for the 5.7L, in the with-filter quantities above. The capacities page does not print a filter part number.

2019 Ram 1500 fluid capacities (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Use it at the filler if you are adding oil. The cited page is a capacity table, not a drain procedure.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer

The capacity note says if replacement is necessary, contact your Toyota dealer.

2019 Camry owner's manual, OM06142U (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The maintenance list names a funnel used only for adding engine coolant.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity is a reference fill. The manual says to recheck the dipstick.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer

The notice says to use only iridium-tipped plugs and not to adjust the gap. It does not name a socket.

2019 Camry ignition system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

Pressures in the table are cold pressures.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The table prints one wheel-nut torque for every type.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Super Long Life Coolant

Named first in the coolant-type cell. The equivalent must match the chemistry listed above.

2020 Camry coolant specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota Super Long Life Coolant

The cooling section names that coolant or a similar HOAT ethylene glycol coolant. It says not to use plain water alone.

2020 Camry cooling system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Genuine Motor Oil of the grade for that engine

API SN/RC SAE 0W-16 on the 2.5L. ILSAC GF-5 SAE 0W-20 on the 3.5L. No filter part number is printed in this section.

2020 Camry oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed for the drain plug

The lubrication section gives a reference capacity and a dipstick check. It does not name a socket or a drain-bolt torque.

2020 Camry owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Bulb number in the table for that position

W5W, 7444NA, WY21W, or 921, only for the bulb-type rows above.

2020 Camry bulb numbers (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

None listed

The light-bulb table names the bulb and does not print a removal procedure.

2020 Camry light bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

DENSO plug listed for that engine

FC16HR-Q8 on the 2.5L. FK20HBR8 on the 3.5L. Gap 0.031 in (0.8 mm).

2020 Camry spark plug specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer

The notice says to use only iridium-tipped plugs and not to adjust the gap. It does not name a socket.

2020 Camry ignition system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

Every tire type prints the same wheel-nut torque.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are recommended cold inflation pressures.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Genuine ATF WS

Specified automatic transaxle fluid for both engines.

2020 Camry ATF specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Genuine Differential Gear Oil LT 75W-85 GL-5

Specified for the AWD transfer and the AWD rear differential.

2020 Camry differential oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer, if fluid is replaced

The transaxle footnote says the capacity is a reference quantity and, if replacement is necessary, to contact a Toyota dealer.

2020 Camry automatic transaxle (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Super Long Life Coolant or the equivalent described above

U.S. vehicles use a 50/50 mix. Canadian vehicles use a 55/45 mix.

Corolla cooling specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota Super Long Life Coolant

Add it only when the engine is cold, up to the FULL or MAX line for the reservoir on the car.

Corolla owner's manual OM02617U (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Genuine Motor Oil meeting the grade for that engine

0W-20 GF-6A on the 1.8 L. 0W-16 GF-6B on the 2.0 L, with 0W-20 only as a temporary substitute.

Corolla lubrication specifications, OM02617U (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Clean rag

The dipstick check says to hold a rag under the end of the dipstick.

McMaster-Carr shop towels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

Oil is added at the filler cap while you watch the dipstick.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The tire size listed for the type on the car

The manual says not to use a wheel size different from the one it recommends.

Corolla tire specifications (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire pressure gauge

The pressures are recommended cold inflation pressures.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Torque wrench

The flat-tire section says to have the wheel nuts tightened to 76 ft-lbf as soon as possible after changing wheels.

McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

Toyota Genuine CVT Fluid FE

CVT only. 7.9 qt reference on the 1.8 L and 9.0 qt reference on the 2.0 L.

Corolla CVT specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

TOYOTA Genuine Manual Transmission Gear Oil LV GL-4 75W or equivalent

Manual transmission only.

Corolla manual transmission specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer for CVT replacement

The CVT note says if replacement is necessary, contact your Toyota dealer.

Corolla owner's manual OM02617U (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota Super Long Life Coolant or the equivalent described in the table

The capacity is labeled as a reference. The table does not print a mix ratio.

2019 Highlander owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity is a reference. Warm the engine, shut it off, wait more than 5 minutes, and read the dipstick.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The bulb named in the light-bulb table

A dash in the bulb-number column is left blank. The type key is used only where the manual prints it.

2019 Highlander light-bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb named for that position

The specifications table names the bulbs. It does not print a removal sequence, so none is added.

2019 Highlander owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The DENSO plug for that engine

Iridium-tipped. The notice says to use only iridium-tipped plugs and not to adjust the gap.

2019 Highlander ignition system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug named in the ignition table

No firing order is printed, so no sequence is drawn.

2019 Highlander owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are recommended cold inflation. Match the sidewall size to the type letter. There is no trim crosswalk.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer if the fluid is replaced

The transaxle footnote says the capacity is a reference and that if replacement is necessary, contact a Toyota dealer.

2019 Highlander owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

SAE 0W-16 oil meeting the grade on the filler cap

The cited pages specify viscosity and a reference capacity. They do not print a filter part number in the text used here.

RAV4 XA50 maintenance data (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity is a reference. Recheck the dipstick instead of pouring the whole reference quantity in one shot.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota Super Long Life Coolant or the equivalent described in the table

The capacity note says that if replacement is necessary, contact a Toyota dealer.

2020 RAV4 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The oil named in the maintenance data

No drain-plug torque is printed. The capacity is a reference. Warm the engine, shut it off, wait more than 5 minutes, and read the dipstick.

2020 RAV4 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The trade number in the light-bulb table

Type A is a clear wedge. Type B is an H16 halogen. Type C is an amber wedge.

2020 RAV4 light-bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb named for that position

The specifications table names the bulbs. It does not print a removal sequence, so none is added.

2020 RAV4 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

DENSO FC16HR-Q8

Iridium-tipped. The notice says to use only iridium-tipped plugs and not to adjust the gap.

2020 RAV4 ignition system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug named in the ignition table

No firing order is printed, so no sequence is drawn.

2020 RAV4 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are recommended cold inflation. Match the sidewall size to the type letter. There is no trim crosswalk.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota dealer if the fluid is replaced

The transmission footnote says the capacity is a reference and that if replacement is necessary, contact a Toyota dealer.

2020 RAV4 owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota Super Long Life Coolant or the equivalent described in the table

The capacity is labeled as a reference. The table does not print a mix ratio.

2019 Tacoma owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity is a reference. Warm the engine, shut it off, wait more than 5 minutes, and read the dipstick.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The trade number in the light-bulb table

Type A is H11 halogen, type B is H9 halogen, type C is H16 halogen, type D is an amber wedge, and type E is a clear wedge.

2019 Tacoma light-bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb named for that position

The specifications table names the bulbs. It does not print a removal sequence, so none is added.

2019 Tacoma owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The DENSO plug for that engine

Iridium-tipped. The notice says to use only iridium-tipped plugs and not to adjust the gap.

2019 Tacoma ignition system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug named in the ignition table

No firing order is printed, so no sequence is drawn.

2019 Tacoma owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are recommended cold inflation. Match the sidewall size to the type letter. There is no trim crosswalk.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that unit

The automatic-transmission footnote says the capacity is a reference and that if replacement is necessary, contact a Toyota dealer.

2019 Tacoma owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Toyota Super Long Life Coolant or the equivalent described in the table

The capacity is labeled as a reference. The table does not print a mix ratio.

2019 Tundra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Funnel

The capacity is a reference. Warm the engine, shut it off, wait more than 5 minutes, and read the dipstick.

McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

The trade number in the light-bulb table

Type A is HB2 halogen, type B is H16 halogen, type C is an amber wedge, and type D is a clear wedge.

2019 Tundra light-bulb table (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The bulb named for that position

The specifications table names the bulbs. It does not print a removal sequence, so none is added.

2019 Tundra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Part

DENSO SK20HR11

Iridium-tipped. The notice says to use only iridium-tipped plugs and not to adjust the gap.

2019 Tundra ignition system (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The plug named in the ignition table

No firing order is printed, so no sequence is drawn.

2019 Tundra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

Tire gauge

The pressures are recommended cold inflation. Match the sidewall size to the type letter. There is no trim crosswalk.

McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)

Tool

The fluid named for that unit

The automatic-transmission footnote says the capacity is a reference and that if replacement is necessary, contact a Toyota dealer.

2019 Tundra owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)