BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2020 Ford Escape
2020 Escape wheel lug nuts are M12 x 1.5 at 100 lb-ft. Retighten them within 100 miles after any wheel disturbance.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2020 Escape Owner's Manual, third printing, August 2020, wheel lug nut torque (opens in a new tab), Ford Motor Company, published 2020-08-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Torque wrench
The specification is 100 lb-ft. The tightening order is a figure and is not redrawn here.
| Item | Figure | Where it comes from |
|---|---|---|
| Thread condition | Torque is for nut and bolt threads free of dirt and rust. Use Ford recommended replacement fasteners. | Wheel lug nut torque specifications |
| After a wheel is disturbed | Retighten to the specified torque within 100 miles (160 kilometers). | Wheel lug nut torque specifications |
Each figure stays with the source named in the last column. If a sequence is a figure in that source and the order is not printed in the text, this page does not invent the order.
| Fastener | Torque | Where it comes from |
|---|---|---|
| Wheel lug nut, M12 x 1.5 | 100 lb-ft (135 Nm) | Wheel lug nut torque specifications |
Remove corrosion and dirt from the wheel and from the hub, brake drum, or brake disc surface that the wheel touches. Check the wheel pilot bore.
The table lists bolt size M12 x 1.5 and 100 lb-ft (135 Nm), with threads free of dirt and rust, using Ford recommended fasteners.
After a tire rotation, a flat-tire change, or any other wheel removal, retighten the lug nuts to that torque within 100 miles (160 kilometers).
Tire pressures are not on this page. This torque section does not print a placard. Cold inflation belongs on the door label for the vehicle you are working on.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Tool
Torque wrench
The specification is 100 lb-ft. The tightening order is a figure and is not redrawn here.
McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.