BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2019 Toyota Highlander
2019 Highlander cold pressures are 36 psi on the road tires in every listed type. Compact spares are 60 psi. Wheel nuts are 76 ft-lbf.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: Toyota 2019 Highlander Owner's Manual, publication OM0E047U, tires and wheels (opens in a new tab), Toyota Motor Sales, U.S.A., Inc., published 2019-01-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Tire gauge
The pressures are recommended cold inflation. Match the sidewall size to the type letter. There is no trim crosswalk.
| Item | Figure | Where it comes from |
|---|---|---|
| Type A | 245/60R18 105T. Front 36 psi, rear 36 psi. Spare T165/90D18 107M at 60 psi. Wheels 18 x 7 1/2 J and 18 x 4T spare. | Tires and wheels, type A |
| Type B | P245/60R18 104T. Front 36 psi, rear 36 psi. Spare T165/90D18 107M at 60 psi. Same wheel sizes. | Tires and wheels, type B |
| Type C | 245/55R19 103T. Front 36 psi, rear 36 psi. Spare T165/90D18 107M at 60 psi. Wheels 19 x 7 1/2 J and 18 x 4T spare. | Tires and wheels, type C |
| Type D | 245/60R18 105T. Front, rear, and spare 36 psi. Wheel 18 x 7 1/2 J. No compact-spare size is printed on this row. | Tires and wheels, type D |
| Type E | P245/60R18 104T. Front, rear, and spare 36 psi. Wheel 18 x 7 1/2 J. | Tires and wheels, type E |
| Type F | 245/55R19 103T. Front, rear, and spare 36 psi. Wheel 19 x 7 1/2 J. | Tires and wheels, type F |
| Above 100 mph | Add 3 psi (20 kPa, 0.2 kgf/cm2 or bar) to the front and rear tires only. Never exceed the maximum cold pressure on the sidewall. | Tires and wheels, high-speed note |
Each figure stays with the source named in the last column. If a sequence is a figure in that source and the order is not printed in the text, this page does not invent the order.
| Fastener | Torque | Where it comes from |
|---|---|---|
| Wheel nut, every tire type in the table | 76 ft•lbf (103 N•m, 10.5 kgf•m) | Tires and wheels |
Types A and B are 18-inch tires at 36 psi, with a T165/90D18 spare at 60 psi. Type C is the 19-inch tire with the same spare pressure.
Those rows do not list a compact spare. Front, rear, and spare are all 36 psi.
Every tire type prints 76 ft•lbf (103 N•m, 10.5 kgf•m).
36 psi is also printed as 250 kPa, and the 60 psi spare is 420 kPa. Above 100 mph (160 km/h), where that speed is permitted, add 3 psi to the front and rear only.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Tool
Tire gauge
The pressures are recommended cold inflation. Match the sidewall size to the type letter. There is no trim crosswalk.
McMaster-Carr tire gauges (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.