What is the tire pressure for a 2017 Fusion?
The owner's manual sends you to the certification label or the tire label. It does not print one cold psi for every Fusion. A T-type mini-spare is 60 psi (4.15 bar).
BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
In-depth guide
2017 Ford Fusion
2017 Fusion cold pressure is on the tire label or the certification label, not in a psi table. A T-type mini-spare is stored at 60 psi.
| Item | Figure |
|---|---|
| Cold pressure | The book points to the Safety Compliance Certification Label or the Tire Label on the B-pillar or the driver's door edge. It does not print a Fusion cold-psi table. |
| Temperature | A 10 F (6 C) drop can drop pressure about 1 psi (7 kPa). Check pressures when the tires are cool, not hot from even one mile of driving. |
| T-type mini-spare | Store and maintain at 60 psi (4.15 bar). |
| Full-size spare | Store and maintain at the higher of the front and rear pressures on the Tire Label. |
| Wear | Replace the tire when tread is worn to one sixteenth of an inch (2 mm). The book also says tires should generally be replaced after six years. |
Source: owner's manual / last verified 2026-10-16 (2017 Fusion Owner's Manual, second printing, edition date February 2016, tire care (opens in a new tab)).
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2017 Fusion Owner's Manual, second printing, edition date February 2016, tire care (opens in a new tab), Ford Motor Company, published 2016-02-01, read 2026-10-16.
Tire gauge
Press the gauge on the valve after the cap is removed. The tires should be cool.
| Item | Figure | Where it comes from |
|---|---|---|
| Cold pressure | The book points to the Safety Compliance Certification Label or the Tire Label on the B-pillar or the driver's door edge. It does not print a Fusion cold-psi table. | Tire care, checking the tire pressure |
| Temperature | A 10 F (6 C) drop can drop pressure about 1 psi (7 kPa). Check pressures when the tires are cool, not hot from even one mile of driving. | Tire care |
| T-type mini-spare | Store and maintain at 60 psi (4.15 bar). | Checking the tire pressure, spare note |
| Full-size spare | Store and maintain at the higher of the front and rear pressures on the Tire Label. | Checking the tire pressure, spare note |
| Wear | Replace the tire when tread is worn to one sixteenth of an inch (2 mm). The book also says tires should generally be replaced after six years. | Inspecting your tires |
Use the Safety Compliance Certification Label or the Tire Label. Check before the car has been driven a mile. Remove the valve cap and press the gauge on the valve.
Add air to the label pressure. If you overfill, press the metal stem and measure again. Replace the cap. Repeat for every tire, including the spare.
A T-type mini-spare is 60 psi. A full-size or dissimilar spare uses the higher of the front and rear label pressures. Look for nails and sidewall damage while the caps are off.
Wheel lug torque is a different table and changes with the engine. It is on the wheel lug nut guide.
The normal maintenance chart says to inspect the tires and measure tread depth at every oil-change interval, and not to go past one year or 10,000 miles between those services. That interval is not a pressure.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for a real part name plus this vehicle. Tool rows do not get a product search. The search is not a part number.
Part
Tire valve cap
The check procedure says to replace the valve cap after the pressure is set.
2017 Fusion tire pressure check (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)As an Amazon Associate I earn from qualifying purchases.
Tool
Tire gauge
Press the gauge on the valve after the cap is removed. The tires should be cool.
The owner's manual sends you to the certification label or the tire label. It does not print one cold psi for every Fusion. A T-type mini-spare is 60 psi (4.15 bar).
When they are cool, meaning they have not been driven even a mile. A 10 F drop can lower pressure about 1 psi.
No. Lug torque is on the wheel-nut guide and is 100 lb-ft on the 1.5L, 2.0L, and 2.5L, and 150 lb-ft on the 2.7L.
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.
Report an error to jordancoates@gmail.com.