BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2019 Toyota Highlander
2019 Highlander oil is ILSAC GF-5 SAE 0W-20. The 2.7L reference fill with a filter is 4.6 qt. The 3.5L is 5.8 qt.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: Toyota 2019 Highlander Owner's Manual, publication OM0E047U, lubrication system (opens in a new tab), Toyota Motor Sales, U.S.A., Inc., published 2019-01-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Funnel
The capacity is a reference. Warm the engine, shut it off, wait more than 5 minutes, and read the dipstick.
| Item | Figure | Where it comes from |
|---|---|---|
| 2.7L 1AR-FE, with filter | 4.6 qt. (4.4 L, 3.9 Imp. qt.). Reference drain and refill. | Lubrication system, oil capacity |
| 2.7L 1AR-FE, without filter | 4.2 qt. (4.0 L, 3.5 Imp. qt.). | Lubrication system, oil capacity |
| 3.5L 2GR-FKS, with filter | 5.8 qt. (5.5 L, 4.8 Imp. qt.). | Lubrication system, oil capacity |
| 3.5L 2GR-FKS, without filter | 5.6 qt. (5.3 L, 4.7 Imp. qt.). | Lubrication system, oil capacity |
| Oil | Toyota Genuine Motor Oil or equivalent, ILSAC GF-5. SAE 0W-20. If 0W-20 is not available, SAE 5W-20 may be used and must be replaced with 0W-20 at the next change. | Engine oil selection |
| Engines in this book | 1AR-FE, 4-cylinder, 163.1 cu. in. (2672 cm3). 2GR-FKS, V6, 210.9 cu. in. (3456 cm3). Minimum 87 octane. | Engine |
The lubrication table splits the 2.7L 4-cylinder 1AR-FE from the 3.5L V6 2GR-FKS.
Both engines in this manual use Toyota Genuine Motor Oil or an equivalent ILSAC GF-5 oil, recommended viscosity SAE 0W-20.
With a filter, the 1AR-FE is 4.6 qt and the 2GR-FKS is 5.8 qt. Without a filter, they are 4.2 qt and 5.6 qt.
No drain-plug torque is printed in the lubrication table, so none is added. The PDF title is the Toyota 2019 Highlander Owner's Manual, publication OM0E047U.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Tool
Funnel
The capacity is a reference. Warm the engine, shut it off, wait more than 5 minutes, and read the dipstick.
McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.