BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
In-depth guide
2019 Toyota Highlander
2019 Highlander brake pad wear limit is 0.04 in. (1.0 mm). Brake fluid is SAE J1703 or FMVSS No. 116 DOT 3.
| Item | Figure |
|---|---|
| Brake pad wear limit | 0.04 in. (1.0 mm). The table does not split front and rear. |
| Parking brake lining wear limit | 0.04 in. (1.0 mm). |
| Pedal clearance | 3.4 in. (85 mm) minimum, at 110 lbf (490 N, 50 kgf) while the engine is running. |
| Pedal free play | 0.04 to 0.08 in. (1 to 2 mm). |
| Parking brake pedal travel | 8 to 11 clicks at 67 lbf (300 N, 31 kgf). |
| Fluid | SAE J1703 or FMVSS No. 116 DOT 3. |
Source: owner's manual / last verified 2026-10-15 (Toyota 2019 Highlander Owner's Manual, publication OM0E047U, brakes (opens in a new tab)).
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: Toyota 2019 Highlander Owner's Manual, publication OM0E047U, brakes (opens in a new tab), Toyota Motor Sales, U.S.A., Inc., published 2019-01-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
| Item | Figure | Where it comes from |
|---|---|---|
| Brake pad wear limit | 0.04 in. (1.0 mm). The table does not split front and rear. | Specifications, brakes |
| Parking brake lining wear limit | 0.04 in. (1.0 mm). | Specifications, brakes |
| Pedal clearance | 3.4 in. (85 mm) minimum, at 110 lbf (490 N, 50 kgf) while the engine is running. | Specifications, brakes |
| Pedal free play | 0.04 to 0.08 in. (1 to 2 mm). | Specifications, brakes |
| Parking brake pedal travel | 8 to 11 clicks at 67 lbf (300 N, 31 kgf). | Specifications, brakes |
| Fluid | SAE J1703 or FMVSS No. 116 DOT 3. | Specifications, brakes |
Brake pad wear limit is 0.04 in. (1.0 mm). Parking brake lining wear limit is the same figure.
Fluid type is SAE J1703 or FMVSS No. 116 DOT 3.
Pedal clearance minimum is 3.4 in. (85 mm) when depressed with 110 lbf (490 N, 50 kgf) while the engine is running.
OM0E047U prints one brake pad wear limit, 0.04 in. (1.0 mm), and the same figure for parking-brake lining wear. Pedal free play is 0.04 to 0.08 in. (1 to 2 mm). Parking-brake pedal travel is 8 to 11 clicks when depressed with 67 lbf (300 N, 31 kgf).
The fluid line is SAE J1703 or FMVSS No. 116 DOT 3 only. A DOT 4 line in a Camry or RAV4 table comes from a different book. No rotor minimum thickness is printed in the brakes block.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for a real part name plus this vehicle. Tool rows do not get a product search. The search is not a part number.
Part
Brake pads for a 2019 Toyota Highlander
The specifications table prints a pad wear limit and does not print a pad part number or a rotor minimum thickness.
2019 Highlander brakes (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
Part
FMVSS No. 116 DOT 3 brake fluid
The Highlander brakes table prints SAE J1703 or FMVSS No. 116 DOT 3.
2019 Highlander brake fluid (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.