BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2020 Honda Pilot
2020 Honda Pilot wheel nuts tighten to 94 lbf-ft. The order is an image in the flat-tire section, so it is not drawn.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2020 Pilot Owner's Manual, changing a flat tire (opens in a new tab), American Honda Motor Co., Inc., published 2020-01-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Torque wrench
The flat-tire section prints the wheel-nut torque after the car is lowered.
Each figure stays with the source named in the last column. If a sequence is a figure in that source and the order is not printed in the text, this page does not invent the order.
| Fastener | Torque | Where it comes from |
|---|---|---|
| Wheel nuts | 94 lbf·ft (127 N·m, 13 kgf·m) | Changing a flat tire |
The flat-tire section says to screw the wheel nuts until they touch the wheel, then lower the vehicle and remove the jack.
Tighten the nuts in the order indicated in the image, going around two to three times in that order.
Wheel nut torque is 94 lbf·ft (127 N·m, 13 kgf·m).
The image shows the order. This page repeats the torque and does not convert the picture into a numbered pattern.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Tool
Torque wrench
The flat-tire section prints the wheel-nut torque after the car is lowered.
McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.