BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2019 Honda Accord
2019 Honda Accord wheel-nut torque from the flat-tire chapter. The tightening order stays in the manual's image.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2019 Accord Owner's Manual, changing a flat tire (opens in a new tab), American Honda Motor Co., Inc., published 2019-01-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Torque wrench
Torque the nuts after the vehicle is lowered.
| Item | Figure | Where it comes from |
|---|---|---|
| Wheel nut torque | 80 lbf-ft (108 N-m, 11 kgf-m). | Changing a flat tire |
Each figure stays with the source named in the last column. If a sequence is a figure in that source and the order is not printed in the text, this page does not invent the order.
| Fastener | Torque | Where it comes from |
|---|---|---|
| Wheel nuts | 80 lbf-ft (108 N-m, 11 kgf-m) | Changing a flat tire |
Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order indicated in the image, two to three times. Wheel nut torque is 80 lbf-ft (108 N-m, 11 kgf-m).
No separate lug specification is copied from a chart outside this flat-tire paragraph. The image that shows the order is left in the manual.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Tool
Torque wrench
Torque the nuts after the vehicle is lowered.
McMaster-Carr torque wrenches (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.