BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2019 Honda Accord
How the 2019 Honda Accord owner's manual moves the wipers to the maintenance position and replaces the blade rubber.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2019 Accord Owner's Manual, checking and maintaining wiper blades (opens in a new tab), American Honda Motor Co., Inc., published 2019-01-01, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Replacement blade rubber
The procedure replaces the rubber in the holder. It does not print a blade length.
Set the power mode to VEHICLE OFF. Hold the wiper switch in MIST, set the power mode to ON, then back to VEHICLE OFF. Both arms move to the maintenance position shown in the manual's image.
Lift the driver-side arm first, then the passenger side. Press and hold the tab and slide the holder off the arm. Pull the blade out of the end cap in the direction of the manual's arrow, then slide it the other way out of the holder.
Insert the flat side of the new blade onto the bottom of the holder until it is all the way in. Fit the end into the cap and slide the holder onto the arm until it locks. Lower the passenger-side arm first, then the driver side. Set the power mode to ON and hold MIST until both arms return to the normal position.
The maintenance position and the pull directions are shown in images. The written steps above are the numbered instructions. This page does not draw the arm or the end cap.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Part
Wiper blade rubber for this holder
The manual does not print a length or a part number. Match the rubber to the holder on the car.
Accord wiper blade procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
Tool
Replacement blade rubber
The procedure replaces the rubber in the holder. It does not print a blade length.
2019 Accord owner's manual (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.