How much oil does a 2019 Crosstrek take?
With the filter: 4.7 US qt (4.4 L, 3.9 Imp qt). Low to full is 1.1 US qt.
BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
In-depth guide
2019 Subaru Crosstrek
2019 Crosstrek oil is 0W-20 synthetic. With the filter it is 4.7 US qt. The book sends the change to the maintenance booklet.
| Item | Figure |
|---|---|
| Required grade | 0W-20 synthetic. API SN with the words RESOURCE CONSERVING, or ILSAC GF-5. |
| If synthetic is unavailable | Conventional oil may be used if synthetic oil is unavailable. |
| If 0W-20 is unavailable | 5W-30 conventional may be used to add oil. Change back to 0W-20 synthetic at the next oil change. |
| With filter | 4.7 US qt (4.4 L, 3.9 Imp qt). Low to full is 1.1 US qt (1.0 L, 0.9 Imp qt). |
Source: owner's manual / last verified 2026-10-16 (Owner's manual publication A1340BE-A, file MSA5M1907A, copyright 2018, edited 2018/4/2. The trailer-towing table in this PDF is headed Crosstrek models. Mile charts live in the separate Warranty and Maintenance Booklet, which was not read. (opens in a new tab)).
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: Owner's manual publication A1340BE-A, file MSA5M1907A, copyright 2018, edited 2018/4/2. The trailer-towing table in this PDF is headed Crosstrek models. Mile charts live in the separate Warranty and Maintenance Booklet, which was not read. (opens in a new tab), Subaru Corporation, published 2018-04-02, read 2026-10-16.
Funnel
For adding oil. The capacity page does not print a drain-plug size.
| Item | Figure | Where it comes from |
|---|---|---|
| Required grade | 0W-20 synthetic. API SN with the words RESOURCE CONSERVING, or ILSAC GF-5. | Engine oil |
| If synthetic is unavailable | Conventional oil may be used if synthetic oil is unavailable. | Engine oil |
| If 0W-20 is unavailable | 5W-30 conventional may be used to add oil. Change back to 0W-20 synthetic at the next oil change. | Engine oil footnote |
| With filter | 4.7 US qt (4.4 L, 3.9 Imp qt). Low to full is 1.1 US qt (1.0 L, 0.9 Imp qt). | Engine oil capacity |
API SN with RESOURCE CONSERVING, or ILSAC GF-5. 5W-30 conventional is only a temporary top-up if 0W-20 is unavailable.
With the filter: 4.7 US qt (4.4 L, 3.9 Imp qt). Recheck the level. Low to full is 1.1 US qt.
Coolant is on the coolant guide. CVT fluid is on the transmission guide.
The separate Warranty and Maintenance Booklet was not read, so no oil-change mile is added.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for a real part name plus this vehicle. Tool rows do not get a product search. The search is not a part number.
Part
0W-20 synthetic engine oil
API SN with RESOURCE CONSERVING, or ILSAC GF-5. Change with filter is 4.7 US qt (4.4 L, 3.9 Imp qt).
2019 Crosstrek oil specification (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)As an Amazon Associate I earn from qualifying purchases.
Tool
Funnel
For adding oil. The capacity page does not print a drain-plug size.
With the filter: 4.7 US qt (4.4 L, 3.9 Imp qt). Low to full is 1.1 US qt.
0W-20 synthetic is required. 5W-30 conventional is only a temporary top-up if 0W-20 is unavailable.
The Warranty and Maintenance Booklet was not read, so no mile is stated.
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.
Report an error to jordancoates@gmail.com.