BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
2022 Hyundai Tucson
2022 Tucson Smartstream G2.5 GDI drain-and-refill oil is 6.13 US qt of SAE 0W-20. The table cites API SN PLUS/SP or ILSAC GF-6.
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2022 Tucson Owner's Manual, recommended lubricants and capacities (opens in a new tab), Hyundai Motor America, published 2022-07-15, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
Funnel
The check procedure is in the maintenance chapter. The change itself is assigned to a Hyundai dealer. No drain-plug torque is printed.
| Item | Figure | Where it comes from |
|---|---|---|
| Smartstream G2.5 GDI, drain and refill | 6.13 US qt (5.8 L). SAE 0W-20, API SN PLUS/SP or ILSAC GF-6. Footnote requires API Latest or ILSAC Latest full synthetic. The viscosity chart requires API SN PLUS or above full synthetic. | Recommended lubricants and capacities; recommended SAE viscosity number |
| Displacement | 152.4 cu. in. (2,497 cc). Bore x stroke 3.5 x 4 in. (88.5 x 101.5 mm). Firing order 1-3-4-2. Four cylinders, in-line. | Engine table |
| Fuel | Unleaded gasoline, octane ((R+M)/2) of 87 (research octane number 91) or higher. Do not use methanol-blended fuels. Do not use gasohol with more than 15% ethanol. Tank 14.27 US gal (54 L). | Fuel requirements and recommended lubricants |
The recommended-lubricants table lists 6.13 US qt (5.8 L) for engine oil, drain and refill. The grade in that row is SAE 0W-20, API SN PLUS/SP or ILSAC GF-6.
Footnote 2 says the engine requires API Latest or ILSAC Latest full synthetic. The viscosity-chart footnote says API SN PLUS or above full synthetic. If a lower grade is used, the oil and filter must be replaced on the severe schedule.
Park in P with the parking brake set and the wheels blocked. Warm the engine until coolant temperature is normal, shut it off, remove the filler cap, and pull the dipstick. Wait 15 minutes for the oil to return to the pan. The level should be between F and L. If it is below L, add the specified oil up to F.
The maintenance chapter says to have the engine oil and filter changed by an authorized Hyundai dealer according to the maintenance schedule. It does not print a drain-plug torque or a filter part number.
Clean around the filler plug, drain plug, or dipstick before opening them. The manual says that is especially important in dust, sand, or on unpaved roads. No filter part number is printed, so none is added.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for the part name plus this vehicle. They are not a part number.
Tool
Funnel
The check procedure is in the maintenance chapter. The change itself is assigned to a Hyundai dealer. No drain-plug torque is printed.
McMaster-Carr funnels (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.