BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
In-depth guide
2025 Toyota Camry
2025 Camry Hybrid pad wear limit is 0.04 in. (1 mm) front and rear. DOT 3 and DOT 4 are both printed.
| Item | Figure |
|---|---|
| Front brake pad wear limit | 0.04 in. (1 mm). |
| Rear brake pad wear limit | 0.04 in. (1 mm). |
| Pedal clearance | 3.5 in. (90 mm) minimum, depressed with 67.4 lbf (300 N, 30.6 kgf) while the hybrid system is operating. |
| Pedal free play | 0.04 to 0.24 in. (1 to 6 mm). |
| Fluid | The brakes table prints two fluid lines and does not assign either line to a vehicle: FMVSS No. 116 DOT 3 or SAE J1703, and FMVSS No. 116 DOT 4 or SAE J1704. |
Source: owner's manual / last verified 2026-10-15 (2025 Camry Hybrid Owner's Manual, publication OM06266U, brakes (opens in a new tab)).
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2025 Camry Hybrid Owner's Manual, publication OM06266U, brakes (opens in a new tab), Toyota Motor Sales, U.S.A., Inc., published 2025-06-24, read 2026-10-15.
Numbers on this page come from the cited source. Match the engine before you use a capacity or a torque. Do not work under a vehicle held only by a jack.
| Item | Figure | Where it comes from |
|---|---|---|
| Front brake pad wear limit | 0.04 in. (1 mm). | Specifications, brakes |
| Rear brake pad wear limit | 0.04 in. (1 mm). | Specifications, brakes |
| Pedal clearance | 3.5 in. (90 mm) minimum, depressed with 67.4 lbf (300 N, 30.6 kgf) while the hybrid system is operating. | Specifications, brakes |
| Pedal free play | 0.04 to 0.24 in. (1 to 6 mm). | Specifications, brakes |
| Fluid | The brakes table prints two fluid lines and does not assign either line to a vehicle: FMVSS No. 116 DOT 3 or SAE J1703, and FMVSS No. 116 DOT 4 or SAE J1704. | Specifications, brakes |
OM06266U lists front 0.04 in. (1 mm) and rear 0.04 in. (1 mm).
The minimum is 3.5 in. (90 mm) at 67.4 lbf (300 N, 30.6 kgf).
The brakes table prints two fluid lines and does not assign either line to a vehicle: FMVSS No. 116 DOT 3 or SAE J1703, and FMVSS No. 116 DOT 4 or SAE J1704. Confirm the reservoir before adding fluid.
This page uses OM06266U, the 2025 Camry Hybrid manual. The gas Camry book is a different publication and is not the source for these figures. Front and rear pad wear limits are each printed as 0.04 in. (1 mm). The table does not print a rotor minimum thickness or a caliper-bolt torque.
Pedal free play is 0.04 to 0.24 in. (1 to 6 mm). The fluid block lists DOT 3 or SAE J1703 and DOT 4 or SAE J1704 as separate lines and does not say which vehicles use which line.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for a real part name plus this vehicle. Tool rows do not get a product search. The search is not a part number.
Part
Brake pads for a 2025 Toyota Camry
The specifications table prints a pad wear limit and does not print a pad part number or a rotor minimum thickness.
2025 Camry Hybrid brakes (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
Part
FMVSS No. 116 DOT 3 brake fluid
One fluid line in the brakes table, printed with SAE J1703. The table does not say which vehicles use this line.
2025 Camry Hybrid brake fluid (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
Part
FMVSS No. 116 DOT 4 brake fluid
The other fluid line in the brakes table, printed with SAE J1704. The table does not say which vehicles use this line.
2025 Camry Hybrid brake fluid (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
Same repair, different model year. Use the page that matches the truck or car in the driveway. A figure on one year is not a figure for the next.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.