What is the lug nut torque on a 2019 Edge?
162 lb-ft (220 Nm), bolt size M14 x 1.5, threads free of dirt and rust.
BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
In-depth guide
2019 Ford Edge
2019 Edge wheel lug nuts are M14 x 1.5 and torque to 162 lb-ft (220 Nm). Retighten them within 100 miles after any wheel disturbance.
| Item | Figure |
|---|---|
| Bolt size | M14 x 1.5. |
| Torque | 162 lb-ft (220 Nm). Threads free of dirt and rust. Use only Ford recommended replacement fasteners. |
| Recheck | Retighten to the specified torque within 100 miles (160 km) after any wheel disturbance, including a tire rotation, a flat repair, or wheel removal. |
Source: owner's manual / last verified 2026-10-16 (2019 Edge Owner's Manual, December 2018 second printing, part KT4J 19A321 AB, edition date 201806. U.S. and Canada. (opens in a new tab)).
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2019 Edge Owner's Manual, December 2018 second printing, part KT4J 19A321 AB, edition date 201806. U.S. and Canada. (opens in a new tab), Ford Motor Company, published 2018-12-01, read 2026-10-16.
Torque wrench
Used for the 162 lb-ft specification. The star order is figure E75442 and is not redrawn.
Lug wrench
The flat-tire steps loosen and snug the nuts with the lug wrench, then say to fully tighten them in the order shown.
| Item | Figure | Where it comes from |
|---|---|---|
| Bolt size | M14 x 1.5. | Wheel lug nut torque specifications |
| Torque | 162 lb-ft (220 Nm). Threads free of dirt and rust. Use only Ford recommended replacement fasteners. | Wheel lug nut torque specifications |
| Recheck | Retighten to the specified torque within 100 miles (160 km) after any wheel disturbance, including a tire rotation, a flat repair, or wheel removal. | Same section |
Each figure stays with the source named in the last column. If a sequence is a figure in that source and the order is not printed in the text, this page does not invent the order.
| Fastener | Torque | Where it comes from |
|---|---|---|
| Wheel lug nuts | 162 lb-ft (220 Nm) | 2019 Edge wheel lug nut torque specifications. The tightening order is a figure and is not reprinted. |
Remove corrosion, dirt, and loose particles from the wheel pilot bore and the hub face before the wheel goes on.
The flat-tire steps say not to fully tighten the nuts until the wheel is lowered. Then tighten in the order shown to 162 lb-ft (220 Nm).
Retighten to that torque within 100 miles after a rotation, a flat, or any other wheel removal.
The tightening order is figure E75442 in the wheels and tires section. Open that figure. It is not redrawn here.
Tire pressures are on the placard. This page is the lug-nut torque only.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for a real part name plus this vehicle. Tool rows do not get a product search. The search is not a part number.
Tool
Torque wrench
Used for the 162 lb-ft specification. The star order is figure E75442 and is not redrawn.
Tool
Lug wrench
The flat-tire steps loosen and snug the nuts with the lug wrench, then say to fully tighten them in the order shown.
162 lb-ft (220 Nm), bolt size M14 x 1.5, threads free of dirt and rust.
Within 100 miles after any wheel disturbance.
The manual shows it as a figure. This page does not redraw that figure.
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.
Report an error to jordancoates@gmail.com.