How do you change 2019 CX-5 wiper blades?
Raise the driver arm first, press the arm tab, and slide the blade component off. The steps then replace the rubber in the holder and slide it back on. No part number is printed.
BaySheet
Opening the sheet…
BaySheet
Opening the sheet…
In-depth guide
2019 Mazda CX-5
2019 CX-5 wiper blades are replaced by sliding the blade off the arm after the driver's arm is raised first. No part number or length is printed.
| Item | Figure |
|---|---|
| Front blades | Raise the driver's arm first. Slide the blade off while pressing the arm tab, replace the rubber in the holder, and align the tabs with the grooves. No length or part number is printed. |
| Rear blade | Remove the cover, raise the arm, and rotate the blade firmly to the right until it unlocks. Do not let the arm fall on the glass. |
| Washer | Front and rear washer fluid come from the same reservoir. The float should be between F and L. Use washer fluid, not coolant. In cold weather use fluid with antifreeze protection. |
Source: owner's manual / last verified 2026-10-16 (2019 Mazda CX-5 Owner's Manual, form 8HH4-EA-19A, June 2022 Print 3, replacing windshield wiper blades (opens in a new tab)).
Difficulty, time, and cost are estimates when this guide gives them. Torque is a cited figure, or it is left off.
Main source: 2019 Mazda CX-5 Owner's Manual, form 8HH4-EA-19A, June 2022 Print 3, replacing windshield wiper blades (opens in a new tab), Mazda Motor Corporation, published 2022-06-01, read 2026-10-16.
| Item | Figure | Where it comes from |
|---|---|---|
| Front blades | Raise the driver's arm first. Slide the blade off while pressing the arm tab, replace the rubber in the holder, and align the tabs with the grooves. No length or part number is printed. | Replacing windshield wiper blades |
| Rear blade | Remove the cover, raise the arm, and rotate the blade firmly to the right until it unlocks. Do not let the arm fall on the glass. | Replacing rear window wiper blade |
| Washer | Front and rear washer fluid come from the same reservoir. The float should be between F and L. Use washer fluid, not coolant. In cold weather use fluid with antifreeze protection. | Inspecting washer fluid level |
If they streak, wash the glass and the blades with a good cleaner or mild detergent and rinse. Do not use gasoline or paint thinner on the rubber.
Raise the driver arm first. Slide the blade off while pressing the tab. Pull the rubber out of the holder groove, insert the new rubber until it contacts the end, and slide it back into place. Align the tabs and the projection with the notch, then lower the arm slowly.
Remove the cover, raise the arm, and rotate the blade to the right until it unlocks. Support the arm on the way down.
The manual's wiper figures show the groove, the tabs, and the notch. They are not redrawn here. Follow the manual's arrows while you do the steps above.
No blade length is printed, so a length is not added. Washer capacity is not printed either. The level is the F and L float.
Outbound links only. BaySheet does not sell parts. Confirm fitment on the retailer page. Amazon links are searches for a real part name plus this vehicle. Tool rows do not get a product search. The search is not a part number.
Part
Windshield wiper blade rubber
The procedure replaces the rubber in the blade holder. No Mazda part number or length is printed.
2019 CX-5 wiper blade procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)As an Amazon Associate I earn from qualifying purchases.
Part
Rear wiper blade
Unlocked by rotating the blade to the right. No part number is printed.
2019 CX-5 rear wiper procedure (opens in a new tab)Search Amazon.com (affiliate link) (opens in a new tab)As an Amazon Associate I earn from qualifying purchases.
Raise the driver arm first, press the arm tab, and slide the blade component off. The steps then replace the rubber in the holder and slide it back on. No part number is printed.
Remove the cover, raise the arm, and rotate the blade firmly to the right until it unlocks. Do not drop the arm on the glass.
Windshield washer fluid, or plain water only if fluid is unavailable. Below about 40 F, use fluid with antifreeze protection. Do not use radiator coolant.
The maintenance checklist is on the site now. The email list is not sending yet, so this box will not store an address.
These guides cover the same kind of work. Their numbers belong to those vehicles, not to this one.
Report an error to jordancoates@gmail.com.